Help ›

Kitchen screen and backup printing

AJJA POS help · ajjapos.com/help/kitchen-screen-and-backup

Two extras for your kitchen: a kitchen screen that shows tickets on a tablet instead of paper, and a backup printer that keeps tickets coming when your network goes down.

1What the kitchen screen does

A spare Android tablet in the kitchen runs the AJJA POS app in kitchen screen mode. To your tills it is just another printer: kitchen tickets appear on the screen as cards, left to right, oldest first, looking exactly like the printed ticket (including add to order and cancel tickets).

  • New order alarm: when a ticket arrives, a loud alarm sounds and a big flashing NEW ORDER box appears in the middle of the screen. Tap it to stop the alarm. If several orders arrive, one tap clears them all.
  • Alarm on / Alarm off at the top switches the alarm off for quiet times (you then get a short beep). Test alarm lets you check how loud it is.
  • Each card shows how long it has waited: green, orange after 10 minutes, red after 20.
  • One box per item: on a ticket with more than one item, each item has its own box. The cook taps an item when it is ready: it turns green with a ✓ (tap again to undo). The top of the card shows how many are done, for example 2/3.
  • The Done button stays grey until every item is ticked, then turns green: tap it when the whole order is ready. An item was cancelled and can't be ticked? Hold the grey button to finish anyway. A ticket with one item can be finished straight away.
  • Recall last brings back a card tapped by mistake, with its ticks.

It works over your shop Wi-Fi, without the internet. You can use a kitchen screen instead of a kitchen printer, or as well as one.

2Set up the kitchen tablet

  1. Install the AJJA POS app on the kitchen tablet and connect it to the same Wi-Fi as your tills.
  2. Log in with a manager PIN and open Settings → Shop.
  3. In the Kitchen screen box, give it a name (for example Kitchen or Fryer) and press Use this tablet as a kitchen screen.

The tablet now shows the kitchen screen all the time, even after a restart. To use it as a till again, press Exit on the screen and enter a manager PIN.

Good to know
Also connect the kitchen tablet to your shop (Getting started, step 5). It then gets new versions of the app: a strip with Update appears at the top of the kitchen screen (see Keep the app up to date). After updating, tap Open and check it is back on the kitchen screen.
Tip
Keep the kitchen tablet on its charger where the cook can see it, and turn off the tablet's battery saver so it stays awake. The alarm uses the tablet's alarm volume: don't put the kitchen tablet on Do Not Disturb.

3Add the screen to each till

  1. On each till or waiter phone, open Settings → Printers.
  2. Under Add a printer, tap Kitchen screen. The till searches the Wi-Fi for a few seconds.
  3. Tap your screen in the list. A test ticket appears on it.
  4. Kitchen is switched on for it. Turn on Bar too if drinks should show on it.

Screen not in the list? Some routers block the search. The kitchen screen shows its address at the top right (for example 192.168.0.161). Under the search, in the box Not in the list? Type the address…, the start of the address is filled in already: type the last number and press Add.

Kitchen screen moved? If the router gives the kitchen tablet a new address, tap Kitchen screen under Add a printer again: the till finds it and updates the address by itself.

Good to know
Tickets not arriving? On the till, open the Printer test & log tab in Settings: it says why a ticket is waiting. Then: check the kitchen tablet is showing the kitchen screen and both are on the same Wi-Fi (not a guest network); on the kitchen tablet press Exit, close the app completely and open it again. Tickets that waited are sent when the screen is back; to throw them away, use Cancel waiting tickets in Settings → Printers.

4Backup printing when the network goes down

Your tills keep selling without the internet. But if the shop's router or Wi-Fi stops working (for example after a power cut), network printers and kitchen screens can't be reached. A Bluetooth printer still works, because it connects straight to the tablet.

  1. Add a Bluetooth printer to the till (see Setting up printers). A waiter belt printer works.
  2. In Settings → Printers, in the Backup printer box, tap that printer.
  3. Leave Switch to the backup printer by itself on.

If a network printer can't be reached for 45 seconds, the till switches to the backup printer: every ticket (kitchen, bar and receipts) prints there, including any that were waiting, and a red 🖨 Backup printing badge shows on the till. Staff can also switch by hand with Use the backup printer now.

5Back to normal printers

When your network is working again, send the till back to its normal printers:

  • In the back office: the Dashboard and Tills page show which till is on backup printing. Press Back to normal printers; the till switches back within a minute.
  • On the till: tap the red badge and choose Back to normal printers.
The Tills page showing a till on backup printing with the Back to normal printers button
Tip
Backup printing never changes your printer settings, so there is nothing to set up again afterwards. Test it once after closing: unplug the router, send an order, and check it prints on Bluetooth.